I. Electric Motor and Generator
| Testing Instrument | Application | Feature | |
|---|---|---|---|
 |
DYNAMIC BALANCING |
Application: |
Checks present condition of relay settings to ensure it is still working safely and efficiently |
 |
VIBRATION ANALYZER |
Application: |
The Model 258 is a portable, battery operated, two channel, palm-sized Dynamic Balancer and Vibration Analyzer. It is intended to be used for analysis and balancing of rotating equipment. The small size and light weight of the model 258 makes it very easy to hand carry to the job site. Accelerometers and a set of scales for correction weights are included. |
 |
DLRO |
Application: |
The 10A Micro-Ohmmeter is a rugged, low resistance tester designed for both plant maintenance and field use. Utilizing a four-lead Kelvin method, the most accurate Micro-Ohmmeter available, with results within 0.05%. |
 |
CD SPRING TENSION TESTER |
Application: |
This instrument measures the tension applied on carbon brushes and springs. It can be applied to test the working load of extension and compression springs under certain working length. |
 |
SURGE COMPARISON TESTER |
Application: |
The TIG A-C is a complete "all in one" Winding Analyzer. Its main function is that of an insulation tester designed to safely detect weak or unstable insulation at voltages far below what the apparatus being tested is designed to withstand. |
 |
SHAFT ALIGNMENT |
Application: |
The TKSA 60 is an extremely rugged wireless laser shaft alignment tool that can be used in harsh environments. The system provides instant expertise by providing a built-in step-by-step alignment |
 |
INSULATION RESISTANCE TESTER |
Applications: |
Checks insulation integrity of your electrical windings complete with PI, DAR and DD |
 |
DIGITAL RESISTANCE TESTER |
Applications: |
Measures actual resistance of your electrical equipment |
 |
SPM AND VIBRATION MONITORING |
Applications: Motors and GeneratorsBearingsFan and Blowers |
This is a powerful data collector enabling analysis of both vibration and bearing characteristics of machine condition before it becomes a major problem. |
 |
INFRARED THERMOGRAPHY |
Application:
Motor and GeneratorsBearingsTransformersSubstationsSwitchgearsCapacitorPower cablesTransmission lines |
Monitors thermal condition of electrical equipment with software backup for image analysis and has been found effective in identifying potential failure of system and equipment safety. |
II. Transformers
| Testing Instrument | Application | Feature | |
|---|---|---|---|
 |
OIL PURIFIER |
Application:
Transformer
|
Checks present condition of relay settings to ensure it is still working safely and efficiently.
|
 |
DLRO |
Application:
Bonding verification on earth/ground systems
Weld joint integrity verification
Contact resistance measurement of breakers and switchgear
Winding Resistance Test
Wire to terminal connections and resistance checks
Cable joint and bus bar connection checks
Mechanical bond tests
|
The 10A Micro-Ohmmeter is a rugged, low resistance tester designed for both plant maintenance and field use. Utilizing a four-lead Kelvin method, the most accurate Micro-Ohmmeter available, with results within 0.05%.
|
 |
TRANSFORMER TURNS RATIO (TTR) |
Applications:
 Transformers |
Tests transformer winding and can locate several types of problem within a transformer |
 |
INSULATION RESISTANCE TESTER |
Applications:
MotorsGeneratorsTransformers |
Checks insulation integrity of your electrical windings complete with PI, DAR and DD
|
 |
DIGITAL RESISTANCE TESTER |
Applications: |
Measures actual resistance of your electrical equipment
|
 |
INSULATION POWER FACTOR (IPF) |
Applications:
Transformers |
This is an effective way to verify insulation integrity of your transformer windings
|
 |
TRANSFORMER OIL TESTER |
Applications:
Transformers |
Dissolve Gas, Water Content and Color a diagnostic method to ensure transformer health.
|
 |
INFRARED THERMOGRAPHY |
Applications: |
Monitors thermal condition of electrical equipment with software backup for image analysis and has been found effective in identifying potential failure of system and equipment safety |
III. Switchgear and Substation
| Testing Instrument | Application | Feature | |
|---|---|---|---|
 |
3 PHASE CONTACT TIMING TESTER |
Applications:
SwitchesBreakersContactors |
Test the closing and opening time of switches contact. Incorrect operation of circuit breaker can cause disastrous consequences on the equipment thus this timing test will always be important to
prevent damages
|
 |
DLRO |
Application: |
The 10A Micro-Ohmmeter is a rugged, low resistance tester designed for both plant maintenance and field use. Utilizing a four-lead Kelvin method, the most accurate Micro-Ohmmeter available, with results within 0.05%. |
 |
PARTIAL DISCHARGE |
Application:
Detection of PD activity in MV cables, switchgear and
other plant in the voltage range: 3.3 kV to 45 kV.
|
The PDSurveyor™ is HVPD's original handheld PD surveying tool. It is the 'first-line of defense' for the detection of partial discharge activity in On-line medium voltage (MV) power cables and plant in the voltage range 3.3 kV to 45 kV. The unit enables the user to carry out rapid, 'look-see' insulation condition testing through a unique combination of measurement technology, incorporating three types of PD sensor: HFCT, TEV and Airborne Acoustic.
|
 |
DIGITAL RESISTANCE TESTER |
Applications: |
Measures actual resistance of your
electrical equipment
|
 |
INFRARED THERMOGRAPHY |
Application:
Motor and GeneratorsBearingsTransformersSubstationsSwitchgearsCapacitorPower cablesTransmission lines |
Monitors thermal condition of electrical equipment with software backup for image analysis and has been found effective in identifying potential failure of system and equipment safety. |
IV. Circuit Breakers and Contractors
| Testing Instrument | Application | Feature | |||
|---|---|---|---|---|---|
| MICROCOMPUTER RELAY TESTER |
|
|
|||
 |
3 PHASE CONTACT TIMING TESTER |
Applications:
SwitchesBreakersContactors |
Test the closing and opening time of switches contact. Incorrect operation of circuit breaker can cause disastrous consequences on the equipment thus this timing test will always be important to prevent damages
|
||
 |
VACUUM BOTTLE INTEGRITY TESTER |
Applications:
Vacuum Circuit
Breakers
|
Enables to check the integrity of vacuum bottle quickly and conveniently and the result is displayed immediately
|
||
 |
DIGITAL RESISTANCE TESTER |
Applications: |
Measures actual resistance of your electrical equipment
|
V. Capacitors
| Testing Instrument | Application | Feature | |
|---|---|---|---|
 |
INFRARED THERMOGRAPHY |
Application:
Motor and GeneratorsBearingsTransformersSubstationsSwitchgearsCapacitorPower cablesTransmission lines |
Monitors thermal condition of electrical equipment with software backup for image analysis and has been found effective in identifying potential failure of system and equipment safety. |
VI. Grounding
| Testing Instrument | Application | Feature | |
|---|---|---|---|
 |
EARTH GROUNDING TESTER |
Application:
Use to measure earth resistance (or Grounding Test)
|
Earth resistance value can be read directly from the scale. Simplified measurement can be easily made by pressing the "Simplified Measurement" switch button only. No need to use a shorting wire as terminals P and C can be internally shorted by pressing this switch. Battery replacement can be easily made without removing the carrying case. Lead wire connection to C and P terminals and proper auxiliary earth resistance can be checked by "OK" lamp. Lead wire connection to C and E terminals is good when "OK" lamp is illuminated.
|
 |
EARTH GROUND LOOP RESISTANCE |
Application:
Use to measure earth resistance (or Grounding Test)
|
The clamp-on ground testing technique used by the Fluke 1630 simplifies ground loop testing and enables non-intrusive leakage current measurement. The compact and rugged design makes the Fluke 1630 easy to use in small places and harsh environments, while the ‘display hold’ and the continuity testing with an audible alarm function ensures convenience in use. The novel technique means that earth ground loop testing and continuity testing can be completed without breaking the circuit.
|
VII. Steam Turbine and Fans
| Testing Instrument | Application | Feature | |||
|---|---|---|---|---|---|
 |
VIBRATION ANALYZER |
|
|
||
 |
SPM AND VIBRATION MONITORING |
|
|
VIII. Relays and Panel Meters
| Testing Instrument | Application | Feature | |||
|---|---|---|---|---|---|
| MICROCOMPUTER RELAY TESTER |
|
|
Contact Us
 |
Head Office: #73 Sitio Kamias Barangay Mambugan, Sumulong Highway, Antipolo City Marikina Office: DE Building 44 Narra cor Yakal St. Cristina Subd. Concepcion Uno Marikina City |
 |
(632) 8942-2871 / 8948-0221 |
 |
(632) 8942-0017 |
 |
deec.salesinfo@directelectrix.com |